A tip for your wall panels.

Post Reply
Pinworthy
Posts: 2
Joined: Sat Sep 13, 2014 1:49 am

A tip for your wall panels.

Post by Pinworthy » Sat Sep 13, 2014 2:14 am

Hi Troy, been watching for a while and really enjoy your efforts. As for the tip, give some thought to using the table saw to rip a 45 degree angle on the top and bottom of each board. Doing this will give you a sort of tongue and groove boards. Depending on how badly the sides of the boards are you could do away with the rosin paper under the boards. Any way just a thought.

techman
Site Admin
Posts: 1323
Joined: Thu Dec 22, 2011 11:49 am

Re: A tip for your wall panels.

Post by techman » Mon Sep 29, 2014 9:03 am

Thank you for the idea. Actually I am planning to use the table saw to do that with the exterior siding.

Post Reply