Discussion on the Quanta Magnetics Q3 Charge Accelerator

Discussions about solar, wind and radiant energy. Electronics and projects dealing with energy savings.
Post Reply
techman
Site Admin
Posts: 1329
Joined: Thu Dec 22, 2011 11:49 am

Discussion on the Quanta Magnetics Q3 Charge Accelerator

Post by techman » Tue Jan 17, 2017 10:29 am

I am currently building the Quanta Magnetics Q3 charge accelerator on my YouTube channel. Here is the first video in the assembly:

https://www.youtube.com/watch?v=d20i7fQUu1s

And the article I wrote which contains full details and photos of the assembly here: http://www.thedoityourselfworld.com/art ... p?id=11400

Please feel free to post your questions, experiences or results from your own experimentation here in this thread. I would love to hear from you.

techman
Site Admin
Posts: 1329
Joined: Thu Dec 22, 2011 11:49 am

Re: Discussion on the Quanta Magnetics Q3 Charge Accelerator

Post by techman » Wed Jan 18, 2017 8:56 am

I have finished soldering one of the motor stator halves. This took me quite a bit of time because I want the motor to look nice as well as function. I ran the wires neatly around the coils and used zip ties to hold them in place.

Watch the video here: https://www.youtube.com/watch?v=AO2muWl_FiA

And read the full article on this project here: http://www.thedoityourselfworld.com/art ... p?id=11401

Please feel free to share your ideas, questions or results here.

techman
Site Admin
Posts: 1329
Joined: Thu Dec 22, 2011 11:49 am

Re: Discussion on the Quanta Magnetics Q3 Charge Accelerator

Post by techman » Thu Jan 19, 2017 9:47 am

Why a lead acid battery desulfator/pulse motor is so important to an off grid homestead such as ours. I explain in the article and video why this is such a huge thing for me.

You can read the article here: http://www.thedoityourselfworld.com/art ... p?id=11402

Watch the video here: https://www.youtube.com/watch?v=vYRXM8cHYd4

Post Reply