Heating your rv with the aluminum duct you received

Discussions about Camper, Trailer and RV repair.
Post Reply
Bkarinsdad
Posts: 2
Joined: Sun Nov 03, 2013 11:26 am

Heating your rv with the aluminum duct you received

Post by Bkarinsdad » Sun Nov 03, 2013 11:39 am

Hi Troy,
Take some 4 inch metal duct and mount it above your wood stove. Then connect to your 4 inch blower. Run the duct through your acesss hole under your bed and let it discharge into your rv.
Now you can close the window above your bed and enjoy more heat from your wood stove.

techman
Site Admin
Posts: 1329
Joined: Thu Dec 22, 2011 11:49 am

Re: Heating your rv with the aluminum duct you received

Post by techman » Mon Nov 04, 2013 1:46 pm

I might try that idea. You are not the first to suggest it.

But first I want to see what happens when I open up the hole under the bed for return air flow into the stove shed.

Not against your idea, just trying one thing at a time.

My only concern though is that I am using a 10 inch fan right now and would then be going to a 4 inch fan. Might be a loss of air flow.

Post Reply