Alternate Energy Projects
Latest in Alternate Energy Projects
I am assembling the Quanta Magnetics Q3 Charge Accelerator toroidal section. This is the third and final section of the three stage pulse motor generator. I have the pulse motor and energizer section running already.
I have been running experiments on the pulse motor and ge
Now that the Quanta Magnetics Q3 Charge Accelerator pulse motor section is finished and running I am performing various experiments with it for a while before moving on to building the energizer/generator section.
The Quanta Magnetics Q3 Charge Accelerator is a three part m
I finished assembly of the Quanta Magnetics Q3 pulse motor section of the motor/generator and got it running for the first time. It took me quite a while to figure out the timing but eventually I got it.
I finished connecting the diodes and solid state relay to the metal pl
I brought the Quanta Magnetics Q3 Charge Accelerator downstairs to the tiny house dining room table for final assembly of the pulse motor section.
I tightened down the rotor retaining screws on both sides of the rotor assembly to make sure there are no gaps between the acry
Work on the Quanta Magnetics Q3 Charge Accelerator continues. I am excited about getting this running as soon as possible. I hope that it will, at the very least, desulfate lead acid batteries for our off grid homestead.
First I finished assembly of the electronics control
I am working on the Quanta Magnetics Q3 charge accelerator which is a pulse motor battery charger. My hopes are to be able to keep my off grid homestead batteries in good shape with this device for many years to come.
Why is a pulse motor/battery desulfator important to an off grid homestead. This is a device which can restore sulfated lead acid batteries to like new condition or even better. I explain why here.
As I work on the Q3 charge accelerator many people are asking me why this is
I picked up some 18 gauge wire and started to solder the wires on the stator half of the Q3 charge accelerator. I want this to look very nice so I am taking my time doing the work.
First I ran the coil wires through the little holes in the stator half so that the wires can
Today I began assembling the Quanta Magnetics Q3 charge accelerator. I have been studying everything I could find about this device for about 12 hours now and I feel that I am ready to begin assembly.
Lou, a disabled man had purchased this a few years ago to put together wi
Page Navigation: 1 (All)