Vehicles & Automotive
Latest in Vehicles & Automotive
March 2nd, 2012
Well, I ran my car for two years with a homemade hydrogen booster and saw good results. Then it got burnt out with use. Last year I did not drive as much, so the project went on the side burner. Now, with rising gas prices, and me driving a lot
March 10th, 2011
Well, its been a long, cold winter and my Hydrogen Booster project had to be put on the side. I had a bad fuel pump just before the onset of winter, which caused the poor old car to sit for a while until I could get to it. By then, winter had set on and the
I have been running my car for the past few weeks without the H2O booster just to see what type of results I may see. I left all the modifications in place, but simply turned off the Hydroxy Booster.
The first day it seemed like there was no change at all. The second day th
I installed a DIY Oxygen Sensor Extender in my old Honda a couple weeks ago and here are the results:
Absolutely no change at all in anything. So, it seems that all those claims of using an oxygen sensor extender to gain fuel economy when used w
After a couple weeks of running the diy hydrogen booster in my car, I have noticed some very important things and found a few problems.
At first, the lid kept coming loose. It is very hard to work the lid down tight on a brand new pvc pipe and threaded cap. It may seem tigh
I have driven a few tanks of gas through my old Honda while using my new homemade hydrogen booster and here are the results:
No savings on gas. Huge performance boost. The car has a lot more power and the motor runs much smoother than ever before with the DIY H2O booster tu
I have installed a DIY hydrogen booster in my 91 Honda Accord to see what kind of benefits I can get from it. My first week results were interesting.
It is very easy to test a small gas engine for compression. A compression test will tell you if the valve seats need to be ground or if the piston rings are badly worn. In many cases the valve seats will wear out first and need to be ground in order to improve engine compression and performance.
The popularity of alloy wheels is perhaps because of its ability to assume different designs. The flexibility of aluminium to handle to handle creative formations born out of the aesthetics of wheel and structural designers allows it to accommodate or implement both the artistic and engineering e
Page Navigation: 1 (All)